| Key | Press | Hold |
|---|---|---|
| MENU | Quick settings | The full menu |
| BACK | Back one step | Home, from anywhere |
| Knob, ▲▼ | Tune, or step channels | — |
| ◀▶ | Channel: zone. VFO: band | — |
| ABC | Next slot, A → B → C | Edit the slot |
| V/M | VFO or channels | The zone list |
| SIDE1 | Monitor on or off | Monitor while held. With the knob: squelch |
| SIDE2 | Scan start or stop | Frequency counter. With the knob: big steps |
| * | Mute or unmute the slot. Twice quickly: slot off | The quick menu |
| # | Help (or pause watch) | Lock or unlock the keys (then * all, 0 all but PTT) |
| Digits | Type a frequency or channel | A shortcut (below) |
| PTT A | Transmit on the active slot | — |
| PTT B | Transmit on slot B | — |
| PTT + SIDE2 | 1750 Hz tone burst | — |
| SIDE1 + SIDE2 | — | Leave Low Power Mode |
| Key | Press | Hold |
|---|---|---|
| MENU | Quick settings | The full menu |
| BACK | Back one step | Home, from anywhere |
| Knob, ▲▼ | Tune, or step channels | — |
| ◀▶ | Channel: zone. VFO: band | — |
| ABC | Next slot, A → B → C | Edit the slot |
| V/M | VFO or channels | The zone list |
| SIDE1 | Monitor on or off | Monitor while held. With the knob: squelch |
| SIDE2 | Scan start or stop | Frequency counter. With the knob: big steps |
| * | Mute or unmute the slot. Twice quickly: slot off | The quick menu |
| # | Help (or pause watch) | Lock or unlock the keys (then * all, 0 all but PTT) |
| Digits | Type a frequency or channel | A shortcut (below) |
| PTT A | Transmit on the active slot | — |
| PTT B | Transmit on slot B | — |
| PTT + SIDE2 | 1750 Hz tone burst | — |
| SIDE1 + SIDE2 | — | Leave Low Power Mode |
| 0 | Home channel |
| 1 | Band scope |
| 2 | TX power: low, mid, high |
| 3 | Squelch |
| 4 | Watch on or off |
| 5 | Tone picker |
| 6 | Next step size (VFO) |
| 7 | Shift: simplex, +, − |
| 8 | Offset amount |
| 9 | Save the VFO as a channel, or copy a channel to the VFO |
On a channel, hold7 and hold8 open the channel's editor.
| 1 | Squelch |
| 2 | TX power |
| 3 | Mode |
| 4 | Tones |
| 5 | Offset |
| 6 | Step (VFO) |
| 7 | Watch |
| 8 | Save or edit the channel |
| 9 | Battery Save |
| 0 | The full menu |
| Knob | Brightness |
| PTT A | Reverse on or off |
| PTT B | Night red on or off |
| SIDE1 | GPS: Off, Auto or On |
| SIDE2 | Bluetooth on or off |
| ▲▼ | Move |
| Knob, ◀▶ | Change the value (it applies at once) |
| OK | Open, or a bigger editor |
| # | Back to the default |
| * | Undo, for 5 seconds |
| BACK | Back one level |
| PTT | Keep the change, go home and transmit |
Typing text (names, callsigns, messages): press a digit several times for its letters. * is a space and # changes upper case, lower case and symbols, as the keys are marked. 1 has . - / @ before its digit; in a callsign only - (your own callsign: - and /). In a message, # also reaches T9, typing word by word. BACK deletes.
| 0 | Home channel |
| 1 | Band scope |
| 2 | TX power: low, mid, high |
| 3 | Squelch |
| 4 | Watch on or off |
| 5 | Tone picker |
| 6 | Next step size (VFO) |
| 7 | Shift: simplex, +, − |
| 8 | Offset amount |
| 9 | Save the VFO as a channel, or copy a channel to the VFO |
On a channel, hold7 and hold8 open the channel's editor.
| 1 | Squelch |
| 2 | TX power |
| 3 | Mode |
| 4 | Tones |
| 5 | Offset |
| 6 | Step (VFO) |
| 7 | Watch |
| 8 | Save or edit the channel |
| 9 | Battery Save |
| 0 | The full menu |
| Knob | Brightness |
| PTT A | Reverse on or off |
| PTT B | Night red on or off |
| SIDE1 | GPS: Off, Auto or On |
| SIDE2 | Bluetooth on or off |
| ▲▼ | Move |
| Knob, ◀▶ | Change the value (it applies at once) |
| OK | Open, or a bigger editor |
| # | Back to the default |
| * | Undo, for 5 seconds |
| BACK | Back one level |
| PTT | Keep the change, go home and transmit |
Typing text (names, callsigns, messages): press a digit several times for its letters. * is a space and # changes upper case, lower case and symbols, as the keys are marked. 1 has . - / @ before its digit; in a callsign only - (your own callsign: - and /). In a message, # also reaches T9, typing word by word. BACK deletes.