The radio's 4 MB SPI flash under Ferrite, layout 3 (decision 333): factory calibration, Ferrite's settings
and records, what is planned, and the space still free. The firmware's own ranges are in layout.rs; the
installer saves the whole chip to your computer first, and a layout change is moved by Ferrite Console over the link.
Each square is 4 KB; a row is 128 KB. Hover or tap one to see what holds it.
A dot: inside layout::WRITABLE, the only range the flash driver lets Ferrite erase or program.
| Range | Size | Contents | layout.rs | Writable | |
|---|---|---|---|---|---|
| 0x000000–0x000FFF | 4 KB | Layout header (layout::LAYOUT_HEADER): magic, layout version (3), 10 installer bytes (the calibration sector's CRC among them, CAL-7), CRC-32; stamped last by an update (LINK-62) | LAYOUT_HEADER | yes | |
| 0x001000–0x002FFF | 8 KB | Settings and slots: copies A and B, one sector each; the record up to 1 KB (decision 87) | SETTINGS | yes | |
| 0x003000–0x003FFF | 4 KB | User trims (crystal ppm, battery correction), two alternating copies (CAL-17) | TRIMS | yes | |
| 0x004000–0x004FFF | 4 KB | Range presets: 224 B each, 16 (to 0x004DFF); DTMF memories: 16 B each, 16 (0x004E00–0x004EFF), and their names (0x004F00–0x004FBF) | PRESETS | yes | |
| 0x005000–0x005FFF | 4 KB | HF state (planned): VFO per HF band and the recent list (10), manual ch 20a | HF_STATE | yes | |
| 0x006000–0x007FFF | 8 KB | Satellites (SAT-2, decision 340): 16 records of 192 B a sector, then a log (sector 0 the info, 31 slots of 32 B; sector 1 the per-satellite choices by catalogue number, 62 slots of 16 B); ferrite-store sats.rs | SATELLITES | yes | |
| 0x008000–0x00BFFF | 16 KB | SI4732 SSB patch (64 B header + 15,832 B patch), from the owner's stock firmware | SSB_PATCH | yes | |
| 0x00C000–0x00DFFF | 8 KB | Free: room for the settings and records above to grow | CONFIG_FREE | yes | |
| 0x00E000–0x00EFFF | 4 KB | Migration mark: a move Console began and hasn't stamped (decision 339) | MIGRATE_MARK | yes | |
| 0x00F000–0x00FFFF | 4 KB | Factory calibration: never erased or written, at stock's address (hardware.md 12.2 maps its bytes) | CALIBRATION | no | |
| 0x010000–0x04FFFF | 256 KB | Channels: 64 B each, 63 per sector (64 sectors, 4,032 slots, 4,000 used) | CHANNELS | yes | |
| 0x050000–0x054FFF | 20 KB | Zones: 32 B each, 127 per sector (5 sectors, 635 slots, 512 used); each holds its channel count (CHAN-36) | ZONES | yes | |
| 0x055000–0x057FFF | 12 KB | APRS settings and quick messages: copies A and B (0x055000, 0x056000) and a spare sector | APRS | yes | |
| 0x058000–0x05FFFF | 32 KB | APRS contacts: 1,016 × 32 B in callsign order (127 per sector), manual APRS-37 | CONTACTS | yes | |
| 0x060000–0x06FFFF | 64 KB | APRS heard list (layout::HEARD, APRS-4, decision 282): a ring of 496 station rows of 128 B, 31 a sector | HEARD | yes | |
| 0x070000–0x07FFFF | 64 KB | APRS message ring: 496 × 128 B (layout::MESSAGES) | MESSAGES | yes | |
| 0x080000–0x08FFFF | 64 KB | GPS waypoints: 2,032 × 32 B, packed (127 per sector) | WAYPOINTS | yes | |
| 0x090000–0x09FFFF | 64 KB | Text pack (English, planned): long text off the MCU flash | TEXT_PACK | yes | |
| 0x0A0000–0x0AFFFF | 64 KB | Held for the packet mailbox (chapter 38) | MAILBOX | yes | |
| 0x0B0000–0x0BFFFF | 64 KB | Predictive text's words: an SPI part from the update file (decision 345) | DICTIONARY | yes | |
| 0x0C0000–0x1BFFFF | 1,024 KB | Free, in one run (what goes here is for a later decision) | FREE | yes | |
| 0x1C0000–0x23FFFF | 512 KB | Language packs (planned): English plus one other at a time | LANGUAGES | yes | |
| 0x240000–0x27FFFF | 256 KB | Boot animation and custom screens (planned) | SCREENS | yes | |
| 0x280000–0x2BFFFF | 256 KB | Fonts at the bigger sizes (planned) | FONTS | yes | |
| 0x2C0000–0x2DFFFF | 128 KB | Event log ring, 992 × 128 B (31 per sector) | EVENT_LOG | yes | |
| 0x2E0000–0x2FFFFF | 128 KB | Scratch ring: 32 sectors taking turns at a rewrite's new content (decision 227) | SCRATCH_RING | yes | |
| 0x300000–0x3FFFFF | 1 MB | Bootloader update area: never written. A stray 0xA55A header at 0x300000 would make the bootloader reflash the MCU from it | UPDATE_AREA | no |
WRITABLE, so no bug above it can reach these; the link's raw data messages are held to the same ranges (LINK-59, LINK-60).ferrite/crates/ferrite-core/src/layout.rs: the ranges the firmware uses.docs/firmware-design.md, "SPI flash layout": this table's words.docs/hardware.md 12: stock's layout and the calibration bytes.python3 docs/tools/mkflashmap.py